HP Elite Slice G2 Maintenance And Service Manual page 70

Skype room system
Table of Contents

Advertisement

Computer will not respond to keyboard or mouse.
Cause
System has locked up.
Computer date and time display is incorrect.
Cause
RTC (real-time clock) battery may need to be replaced.
NOTE:
Connecting the computer to a live AC outlet prolongs the
life of the RTC battery.
There is no sound or sound volume is too low.
Cause
System volume may be set low or muted.
Poor performance.
Cause
Processor is too hot.
Hard drive is full.
62
Chapter 6 Troubleshooting without diagnostics
Solution
CAUTION:
When attempting to resume from Sleep state, do not
hold down the power button for more than four seconds.
Otherwise, the computer will shut down and you will lose any
unsaved data.
Restart computer.
Solution
Reset the date and time under Control Panel (Computer Setup
can also be used to update the RTC date and time). If the problem
persists, replace the RTC battery. See the Removal and
Replacement section for instructions on installing a new battery,
or contact an authorized dealer or reseller for RTC battery
replacement.
To access Control Panel in Windows® 7, select Start, and then
select Control Panel.
To access Control Panel in Windows 10, type control panel in
the taskbar search box, and then select Control Panel.
Solution
1.
Check the Computer Setup settings to make sure the
internal system speaker is not muted (this setting does not
affect the external speakers).
2.
Make sure the external speakers are properly connected and
powered on and that the speakers' volume control is set
correctly.
3.
Use the system volume control available in the operating
system to make sure the speakers are not muted or to
increase the volume.
Solution
1.
Make sure airflow to the computer is not blocked. Leave a
10.2-cm (4-inch) clearance on all vented sides of the
computer and above the monitor to permit the required
airflow.
2.
Make sure fans are connected and working properly (some
fans only operate when needed).
3.
Make sure the processor heat sink is installed properly.
Transfer data from the hard drive to create more space on the
hard drive.

Advertisement

Table of Contents
loading

Table of Contents