Table of Contents
Advertisement
Updating SMBIOS information
When replacing the system board, you must reprogram the SMBIOS information on the affected computer.
Failure to reprogram the board will result in eventual failure, such as an activation failure (need to reactivate
the system) or a system recovery failure.
To update SMBIOS information in Computer Setup:
1.
Turn on or restart the computer.
2.
Press
Esc
screen.
NOTE:
Esc
when the monitor light turns green to access the utility.
3.
Press
F10
4.
Go to Main > Set Machine Unique Data.
5.
Verify that all fields have appropriate data.
while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the
If you do not press
Esc
at the appropriate time, you must restart the computer and again press
to enter Computer Setup.
System board
43
Advertisement
Table of Contents
