Thermo Scientific Orbitrap Fusion Lumos Getting Started Manual page 3

Thermo Fisher Scientific performs complete testing and evaluation of its products to ensure full compliance with
applicable North American and European regulations. Your system meets the applicable requirements in the
electromagnetic compatibility (EMC) and product safety standards described in this section.
Unauthorized changes that you make to your system will void regulatory compliance and may defeat the built-in
protections for your instrument. Some examples of unauthorized changes include using replacement parts or adding
components, options, or peripherals that Thermo Fisher Scientific has not qualified and authorized. Unauthorized
changes can also result in bodily injury and/or damage to your system and laboratory.
Ensure continued compliance with regulatory standards:
• Follow all installation instructions provided in the documentation that comes with your system.
• Order replacement parts (as specified in the instrument manual) and additional components, options, and periph-
erals directly from Thermo Fisher Scientific or an authorized representative.
Regulatory compliance results for the following Thermo Scientific™ mass spectrometers:
• Orbitrap Fusion Lumos
• Orbitrap Fusion and Orbitrap ID-X
Orbitrap Fusion Lumos
Low Voltage Directive 2014/35/EU
This device complies with Low Voltage Directive 2014/35/EU and the harmonized safety standard IEC/EN/CSA/
UL 61010-1, 3rd Edition.
EMC Directive 2014/30/EU and other EMC test standards
This device was tested by TÜV Rheinland of North America and complies with the following EMC standards:
47 CFR 15, Subpart B, Class A: 2015
CISPR 11: 2009 + A1
ICES-003: 2014
EN 55011: 2009 + A1
EN 61326-1: 2013
Regulatory Compliance
EN 61000-3-2: 2006 + A1 + A2
EN 61000-3-3: 2008
EN 61000-4-2: 2009
EN 61000-4-3: 2006 + A1 + A2
EN 61000-4-4: 2004 + A1
EN 61000-4-5: 2006
EN 61000-4-6: 2009
EN 61000-4-8: 2010
EN 61000-4-11: 2004