Thermo Scientific Orbitrap Fusion Lumos Getting Started Manual page 2

© 2018 Thermo Fisher Scientific Inc. All rights reserved.
EASY-ETD, EASY-IC, FlexMix, Fusion, ID-X, LTQ Velos, Lumos, nanoViper, and Orbitrap ID-X are
trademarks; Unity is a registered service mark; and Hypersil GOLD, LTQ, Orbitrap, Orbitrap Fusion,
Orbitrap Fusion Lumos, Pierce, Thermo Scientific, Tribrid, and Xcalibur are registered trademarks of Thermo
Fisher Scientific Inc. in the United States. Fisher Scientific and Optima are registered trademarks of Fisher
Scientific Co. in the United States.
The following are registered trademarks in the United States and other countries: Excel, Microsoft, and
Windows are registered trademarks of Microsoft Corporation. Teflon is a registered trademark of E.I. du Pont
de Nemours & Co.
The following are registered trademarks in the United States and possibly other countries: APPI, PhotoMate,
and Syagen are registered trademarks of Morpho Detection, Inc. Rheodyne is a registered trademark of IDEX
Health & Science, LLC.
Chemyx is a trademark of Chemyx Inc. MX Series II is a trademark of IDEX Health & Science, LLC.
All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries.
Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in the
product operation. This document is copyright protected and any reproduction of the whole or any part of this
document is strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.
The contents of this document are subject to change without notice. All technical information in this
document is for reference purposes only. System configurations and specifications in this document supersede
all previous information received by the purchaser.
This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This
document shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions of
Sale shall govern all conflicting information between the two documents.
Release history: Rev A, June 2018
Software version: (Thermo) Foundation 3.1 SP5 and later, Xcalibur 4.2 and later, Tune 3.1 and later
For Research Use Only. Not for use in diagnostic procedures.