Before servicing the unit, turnings off all power supplies.
Then, do not touch the electric parts for 10 minutes due to the risk of electric shock.
17. Main frame removal
Start from removing Side fans.
1. Disconnect the connectors of Main PCB. ( CN3 / CN17 / CN42 )
2. Remove the screws. ( 5 places )
3. Remove the Main frame.
Lift the Main frame upward, and pull toward you.
Tips! Do not too lift up the under port.
18. Limit switch removal
Start from removing main frame.
1. Disconnect the connector
of Main PCB. ( CN38 / White )
2. Remove the screws
( 3 places ) and rail cover.
04-08
3. Remove the
4. Remove the
hook.
hooks. ( 3 places )