Before servicing the unit, turnings off all power supplies.
Then, do not touch the electric parts for 10 minutes due to the risk of electric shock.
10. Switch PCB removal
Start from removing the Front panel.
1. Push the hooks. ( 2 places ) 2. Push the hook.
11. IR Receiver PCB removal
Start from removing the Front panel.
1. Remove the screw and cover.
12. Speaker removal
Start from removing the Front panel.
1. Disconnect the connector
of Main PCB. ( CN29 / Red )
2. Push upside supporter.
2. Cut binder and remove the screws. ( 2 places )
04-04
3. Disconnect the connector.
3. Disconnect the connector.