Before servicing the unit, turnings off all power supplies.
Then, do not touch the electric parts for 10 minutes due to the risk of electric shock.
13. Human Sensor removal
Start from opening Control box.
1. Release cables.
3. Release bottom the hooks. ( 2 places )
14. Grill switch removal
Start from removing Main frame.
1. Disconnect the connector
of Main PCB. ( CN46 / White )
15. Under cover removal
There are hooks on both sides. Bend the center and remove each other.
2. Release top shaft and bottom shaft from holder.
4. Disconnect the connector.
2. Remove the hook.
Remove the screw cap and screws.
04-05
3. Remove the hooks.
( 2 places )
( 3 places )