Operation Mode; Network; Lan - TP-Link TL-WR902AC User Manual

Chapter 5
• Wireless 2.4GHz/5GHz
wireless function, and you can configure them on the
Settings page.
•

Operation Mode

• Wireless Radio
• Name (SSID)
• Mode - The current wireless working mode in use.
• Channel - The current wireless channel in use.
• Channel Width
• MAC Address
• System Up Time - The length of the time since the router was last powered on or
reset.
Click Refresh to get the latest status and settings of the router.
5. 2. Operation Mode
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Operation Mode.
3. Select the operation mode as needed and click Save.
5. 3.

Network

5. 3. 1.

LAN

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Network > LAN.
3. Configure the IP parameters of the LAN and click Save.
- This field displays the basic information or status of the
- The current operation mode of the router.
- Indicates whether the wireless feature is enabled or not
- The SSID of the network.
- The current wireless channel width in use.
- The physical address of the router.
Configure the Router in Access Point Mode
Wireless 2.4GHz/5GHz > Basic
82