Ftp Server - TP-Link TL-WR902AC User Manual

Chapter 8
a shared folder which does not allow anonymous login, uncheck the box to disable
this function. And Folder Table will be displayed as shown below.
• Share Name - This folder's display name.
• Directory - The real full path of the specified folder.
• User Access - The authorization of the user is displayed. * users mean Super Users
who have the full-access permission to all activated volumes and share folders. Grey
users mean the users who have no right to use this function. Others are common
users.
• Status - The status of the entry is enabled or disabled.
• Edit - Click Edit in the table, and then you can modify the entry.
8. 6. 2.

FTP Server

You can share specific folders on you USB drive on the LAN or access your USB drive
outside the local area network.
For example:
• Only share specific folders with clients on the LAN.
• Share photos and other large files with your friends without logging in to (and paying
for) a photo-sharing site or email system.
• Get a safe backup for the material for a presentation.
¾ To set up your FTP server:
1. Insert your USB storage device into the router's USB port directly or using a USB
cable. Wait several seconds until the USB LED becomes solid on.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
3. Go to USB Settings
4. Click Enable to enable the FTP Server.
5. Click Enable to enable the internet access to the FTP server.
6. Specify a port number for the
7. Click Apply.
¾ To specify a folder to be accessed via the FTP server:
> FTP Server.
Service Port. The default value is 21.
Configure the Router in Hotspot Router Mode
174