Ip&Mac Binding; Binding Settings - TP-Link TL-WR902AC User Manual

Chapter 8 Configure the Router in Hotspot Router Mode
3. Click Save.
8. 13. IP&MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device's IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the ARP list, but with an unrecognized MAC address.

8. 13. 1. Binding Settings

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to IP & MAC Binding > Binding Settings.
3. Select Enable for ARP Binding.
4. Click Save.
¾ To add IP & MAC Binding entries:
1. Click Add New.
196