Network; Wan - TP-Link TL-WR902AC User Manual

Chapter 8
• MAC Address
• IP Address - The LAN IP address of the router.
• Subnet Mask
• Wireless 2.4GHz/5GHz
wireless function, and you can configure them on the
Settings page.
• Operation Mode
• Wireless Radio
• Name (SSID)
• Mode - The current wireless working mode in use.
• Channel Width
• Channel - The current wireless channel in use.
• MAC Address
•

WAN

- This field displays the current settings of the WAN, and you can configure them
on the

Network

> WAN
• MAC Address
• IP Address
or 0.0.0.0 if the IP Address is assigned dynamically and there is no internet
connection.
• Subnet Mask
• Default Gateway
Dynamic IP as the internet connection type.
• DNS Server
• System Up Time - The length of the time since the router was last powered on or
reset.
Click Refresh to get the latest status and settings of the router.
8. 2. Network
8. 2. 1. WAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Network > WAN.
3. Configure the IP parameters of the LAN and click Save.
- The physical address of the router.
- The subnet mask associated with the LAN IP address.
- This field displays the basic information or status of the
- The current operation mode of the router.
- Indicates whether the wireless feature is enabled or not.
- The SSID of the network.
- The current wireless channel width in use.
- The physical address of the router.
page.
- The physical address of the WAN port.
- The current WAN (Internet) IP Address. This field will be blank
- The subnet mask associated with the WAN IP Address.
- The Gateway currently used is shown here. When you use
- The IP addresses of DNS (Domain Name System) server.
Configure the Router in Hotspot Router Mode
Wireless 2.4GHz/5GHz > Basic
152