Diagnostic - TP-Link TL-WR902AC User Manual

Chapter 4
¾ To set time manually:
1. Select your local time
2. Enter the Date in Month/Day/Year format.
3. Enter the Time in Hour/Minute/Second format.
4. Click Save.
¾ To set time automatically:
1. Select your local time
2. Enter the address or domain of the
3. Click Get GMT to get time from the internet if you have connected to the internet.
¾ To set Daylight Saving Time:
1. Select Enable Daylight
2. Select the start time from the drop-down list in the
3. Select the end time from the drop-down list in the
4. Click Save.
Note: This setting will be used for some time-based functions such as firewall. You must specify your time zone once
you log in to the router successfully; otherwise, time-based functions will not take effect.

4. 16. 2. Diagnostic

Diagnostic is used to test the connectivity between the router and the host or other
network devices.
zone.
zone.
NTP Server I
Saving.
Configure the Router in Wireless Router Mode
or NTP Server
Start field.
End field.
II.
73