Chapter 5
5. 4. 3.
Wireless Security
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Wireless 2.4GHz/5GHz
3. Configure the security settings of your 2.4GHz/5GHz wireless network and click Save.
•
Disable Wireless Security
If disabled, wireless clients can connect to the router without a password. It's strongly
recommended to choose one of the following modes to enable security.
•
WPA/WPA2-Personal
passphrase.
•
Version
- Select Auto,
•
Encryption
- Select Auto,
•
Wireless Password
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
•
Group Key Update Period
The value can be 0 or at least 30. Enter 0 to disable the update.
•
WPA/WPA2-Enterprise
>
Wireless
Security.
- The wireless security function can be enabled or disabled.
- It's the WPA/WPA2 authentication type based on pre-shared
WPA-PSK
or WPA2-PSK.
TKIP
or AES.
- Enter ASCII or Hexadecimal characters. For Hexadecimal,
- Specify the group key update interval in seconds.
- It's based on Radius Server.
Configure the Router in Access Point Mode
86