Address Reservation - TP-Link TL-WR902AC User Manual

Chapter 4
2. Go to DHCP > DHCP Client List
the router.
• Client Name - The name of the DHCP client.
• MAC Address - The MAC address of the DHCP client.
• Assigned IP - The IP address that the router has allocated to the DHCP client.
• Lease Time - The time of the DHCP client leased. After the dynamic IP address has
expired, a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and show the
current connected devices, click Refresh.
4. 5. 3.

Address Reservation

You can reserve an IP address for a specific client. When you have specified a reserved
IP address for a PC on the LAN, this PC will always receive the same IP address each
time when it accesses the DHCP server.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to DHCP > Address
3. Click Add New and fill in the blanks.
1 ) Enter the MAC address (in XX:XX:XX:XX:XX:XX format) of the client for which
you want to reserve an IP address.
2 ) Enter the IP address (in dotted-decimal notation) which you want to reserve for
the client.
3 ) Leave the status as Enabled.
Configure the Router in Wireless Router Mode
to view the information of the clients connected to
Reservation.
41