Wireless; Basic Settings - TP-Link TL-WR902AC User Manual

Chapter 8
8. 3.

Wireless

8. 3. 1.

Basic Settings

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless 2.4GHz/5GHz
3. Configure the basic settings for the 2.4GHz/5GHz wireless network and click Save.
In the Client Setting section, you can change the settings for the public Wi-Fi that you
want to connect to.
• Scan - Click to scan for wireless networks. When a public Wi-Fi is selected, the SSID,
MAC Address and other parameters except Wireless Password will be automatically
filled in.
• Wireless Password
In the AP Setting, you can change the settings for your 2.4GHz/5GHz wireless network.
• Wireless Network Name
TP-Link_XXXX (XXXX indicates the last unique four numbers of each router's MAC
address). It is strongly recommended that you change your network name (SSID). This
value is case-sensitive. For example, TEST is NOT the same as test.
• Mode - Select the desired mode. It is strongly recommended that you keep the default
setting 11bgn mixed
> Basic Settings.
- Enter the password of the public Wi-Fi you want to connect to.
- Enter a string of up to 32 characters. The default SSID is
or 11a/n/ac mixed.
Configure the Router in Hotspot Router Mode
161