Operation Mode; Wireless Router Mode - TP-Link TD-W9970 User Manual

Chapter 4
5. Scroll down the page, enable IPv6, and configure the IPv6 parameters.
• Addressing Type: Consult your ISP for the addressing type (DHCPv6 or SLAAC).
SLAAC is the most commonly used addressing type.
• IPv6 Gateway: Keep the default setting as
Note: If your ISP has provided the IPv6 address, click
specified by ISP and enter the parameters provided by your ISP.
6. Click Save to make the settings effective. Now IPv6 service is available for your
network.
4. 5.

Operation Mode

4. 5. 1.

Wireless Router Mode

If you already have a modem or your internet comes via an Ethernet jack on the wall, you
can set up the modem router as a regular wireless router to share the internet.
1. Connect the power adapter to the router and turn on the router.
2. Connect the computer to the router via an Ethernet cable or wirelessly. For details,
refer to Connect Your Modem
Note: The default network name (SSID) and password are printed on the bottom panel of the router.
3. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
4. Go to Advanced
Save. The modem router will reboot.
Router.
> Operation Mode, select the
Set Up Internet Connections
Current Connection.
Advanced to reveal more settings. Check to use IPv6
Wireless Router Mode, and click
17