Dmz - TP-Link TL-WR902AC User Manual

Chapter 8
ports will be opened for subsequent connections. The router can record the IP address
of the host. When the data from the Internet return to the external ports, the router
can forward them to the corresponding host. Port triggering is mainly applied to online
games, VoIPs, video players and common applications including MSN Gaming Zone,
Dialpad, Quick Time 4 players and more.
Follow the steps below to configure the port triggering rules:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Forwarding
3. Click Add New. Select the desired application from the
trigger port amd incoming ports will be automatically filled in. The following picture
takes application MSN Gaming Zone
4. Leave the status as
Note:
• You can add multiple port triggering rules as needed.
• The triggering ports can not be overlapped.
• If the application you need is not listed in the
manually. You should verify the incoming ports the application uses first and enter them in
Ports field. You can input at most 5 groups of ports (or port sections). Every group of ports must be set
apart with ",". For example, 2000-2038, 2050-2051, 2085, 3010-3030.
8. 7. 3.

DMZ

When a PC is set to be a DMZ (Demilitarized Zone) host in the local network, it is totally
exposed to the Internet, which can realize the unlimited bidirectional communication
between internal hosts and external hosts. The DMZ host becomes a virtual server with
all ports opened. When you are not clear about which ports to open in some special
applications, such as IP camera and database software, you can set the PC to be a DMZ
host.
Note: DMZ is more applicable in the situation that users are not clear about which ports to open. When it is enabled, the
DMZ host is totally exposed to the Internet, which may bring some potential safety hazards. If DMZ is not in use, please
disable it in time.
> Port Triggering.
as an example.
Enabled and click Save.
Common Applications
Configure the Router in Hotspot Router Mode
Common Applications
list, please enter the parameters
list. The
Incoming
182