TP-Link TL-WR902AC User Manual page 69

Chapter 4
3 ) Click Save.
5. Go to Access Control
rule.
1 ) Click Add New.
2 ) Give a name for the rule in the
host_1 from the host drop-down list; select
from the target drop-down list; select
the schedule drop-down list.
3 ) Leave the status as
6. Select Enable Internet access control
Control function.
7. Select Deny the packets not specified by any filtering rules
to passthrough this device
Save.
Configure the Router in Wireless Router Mode
> Rule and add a new access control
Description
Enabled as click Save.
as the default filter rules and click
field. Select
target_1
schedule_1 from
to enable Access
62