Operation Mode; Network; Wan - TP-Link Archer C50 User Manual

Chapter 4
4. 3.

Operation Mode

The router supports three operation modes: Wireless Router mode, Access Point mode,
and Range Extender Mode.
The default mode is
mode, the device enables multiple users to share the internet connection via ADSL/
Cable Modem.
For hardware connection, refer to
4. 4.

Network

4. 4. 1.

WAN

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Network > WAN.
3. Configure the IP parameters of the LAN and click Save.
Dynamic IP
If your ISP provides the DHCP service, please select
automatically get IP parameters from your ISP.
Click Renew to renew the IP parameters from your ISP.
Click Release to release the IP parameters.
• MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
• Get IP with Unicast
applications. If you cannot get the IP address normally, you can choose this option. (It
is rarely required.)
Wireless Router mode, which is required most commonly. In this
Connect Your
- A few ISPs' DHCP servers do not support the broadcast
Configure the Router in Wireless Router Mode
Router.
Dynamic IP, and the router will
15