Reboot; Password - TP-Link TL-WR902AC User Manual

Chapter 6
¾ To restore configuration settings:
1. Click Choose File to locate the backup configuration file stored in your computer, and
click Restore.
2. Wait a few minutes for the restoring and rebooting.
Note: During the restoring process, do not power off or reset the router.
6. 7. 5.

Reboot

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP address (system will reboot automatically).
• Change the DHCP settings.
• Change the operation mode.
• Change the web management port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
6. 7. 6.

Password

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
and password of the router.
> Reboot, and you can restart your router.
> Password, and you can change the factory default username
Configure the Router in Range Extender Mode
128