Firmware Upgrade - TP-Link TL-WR902AC User Manual

Chapter 5
• Switch- Enable or disable Ping Watch Dog.
• Destination IP - The IP address of the target host where the Ping Watch Dog Utility is
sending ping packets.
• Interval - Time interval between two ping packets which are sent out continuously.
• Startup Delay - Time delay before first ping packet is sent out when the router is
restarted.
• Fail Count - Upper limit of the ping packets the router can drop continuously. If this
value is overrun, the router will restart automatically.
5. 7. 3.

Firmware Upgrade

TP-Link is dedicated to improving and richening the product features, giving users
a better network experience. We will release the latest firmware at TP-Link official
website. You can download the latest firmware file from the
www.tp-link.com and upgrade the firmware to the latest version.
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
3. Go to System Tools
4. Click Choose File
> Firmware Upgrade.
to locate the downloaded firmware file, and click Upgrade.
Configure the Router in Access Point Mode
Support page of our website
104