TP-Link TL-WR902AC User Manual page 33

Chapter 4
• MTU(Bytes) - The default MTU size is 1480 bytes. It is not recommended that you
change the default MTU size unless required by your ISP.
• IGMP Proxy - Select to enable the IGMP Proxy feature if the IPTV service provided by
the ISP is IGMP techonology-based.
• Connection Mode
• Always On - Connect automatically after the router is connected.
• Connect on demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
• Connect manually
immediately. This mode also supports the
on demand mode. The internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
Note: Sometimes the connection cannot be terminated although you have specified the
applications are visiting the internet continually in the background.
PPTP
If your ISP provides PPTP connection, please select PPTP.
Configure the Router in Wireless Router Mode
- In this mode, the internet connection can be terminated
- You can click Connect/Disconnect to connect/disconnect
Max Idle Time function as
Max Idle Time
Max Idle Time
Connect
because some
26