TP-Link TL-WR902AC User Manual page 130

Chapter 6
5. Click Add New Folder. Specify a name for the folder to be shared in the
field. And select the folder you want to share.
6. Click Apply.
¾ To access the USB disk:
1. Connect Your USB Disk
Insert your USB storage device into the router's USB port directly or using a USB cable.
Wait several seconds until the USB LED becomes solid on.
Tips:
• If you use USB hubs, make sure no more than 2 devices are connected to the router.
• If the USB storage device requires using bundled external power, make sure the external power has been
connected.
• If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
• Before you physically disconnect a USB device from the router, safely remove it to avoid data damage:
Go to USB Settings > USB Mass Storage
2. Access the Media Files on Your USB Disk
Now the DLNA-supported devices (such as your computer and pad) connected to the
router can detect and play the media files on the USB disk.
Configure the Router in Range Extender Mode
and click Disconnect.
Share Name
123