Numberfilter - Vidicode Call Recorder ISDN Manual

Following the In-Line mode setting as described above the display will
show:
Notification:
NEXT
• Press CHANGE to change Notification method. Select one of the
following options:
• Incoming
• Outgoing
• Always
• Off
These options work as follows:
When "Incoming" is selected the message will be played when an
incoming call is answered.
When "Outgoing" is selected the message will be played when an
outgoing call is answered.
When "Always" is selected the message is played on both incoming and
outgoing calls.
When "Off" is selected there is no notification.
The notification is standard disabled.
Please refer to § 6.1 how to record the notification message.
• Press NEXT NEXT to continue in the menu with the Numberfilter NEXT NEXT
or press STOP STOP to exit the configuration
STOP STOP

4.7 Numberfilter

The numberfilter is used to hide or replace extension numbers on
outgoing calls. The reason to do this is that the PBX has to disclose the
internal number to the recorder which will allow you to sort the
recordings by the extension number.
Depending on the setting the number can be hidden altogether or
replaced by the general number.
36 Call Recorder PRI ISDN manual ©Vidicode 2008
CHANGE
configuration menu.
configuration configuration
Off
STOP
Numberfilter setting Numberfilter Numberfilter