Dictionary - SINTERIT LISA User Manual

IMPORTANT!
Getting to know with the information that is needed to perform a specific task.
ATTENTION!
It is necessary to wear protective gloves. Mandatory action when working with
powder.
ATTENTION!
It is necessary to wear protective face mask. Mandatory action when working
with powder.
IMPORTANT!
You must read the instructions before taking action.

9) DICTIONARY

The following terms and forms have been adopted and used in the manual.
1. SINTERIT LISA PRINTER (3D printer, printer, machine, device, product) – a printer
in the additive manufacturing technology (3D) of an LS (laser sintering) type. A device
dedicated for professional and quick manufacturing of spatial prototypes or creating
three dimensional models of objects .
2. SINTERIT STUDIO – a control and support software for the SINTERIT LISA printer.
3. PA12 SMOOTH (PA12, polyamide powder, nylon powder, PA powder, PA12
powder, powder) – a polyamide powder with the granulation at 20 – 100 micrometers,
black, with its properties in accordance with the capabilities of the SINTERIT LISA
printer.
4. FLEXA BLACK – a material from the group of Thermoplastic Polyurethane Elastomer
(TPU). Elastic and flexible, and at the same time hard and resistant to inter alia
chemical agents. Similar in its properties to gum. Possesses good formability properties
(returns to its initial position). Suppresses hits and shocks well. Not as resistant to
temperature as PA 12.
5. RECOATER – a recoater in the form of a roller, moving on a guide bar and a wire.
Used to transfer the powder from the SOURCE BED to the PRINT BED during the
printing.
6. SOURCE BED (Source, Feed Bed) – a chamber for the new, unsintered powder.
7. PRINT BED – a chamber in which the sintering of the powder takes place in layers,
creating the print.
8. OVERFLOW BIN – the overflow bin chamber is used to collect the excess unsintered
powder, transferred from the SOURCE BED to the PRINT BED using the RECOATER.
9. FRESH POWDER PA12 SMOOTH (container number 1, Fresh Powder) – fresh
powder, which needs to be mixed with the PRINT READY POWDER PA12 SMOOTH
9