Information About Legal Regulations; Disclaimer - SINTERIT LISA User Manual

2) INFORMATION ABOUT LEGAL REGULATIONS

No part of this publication may be reproduced, stored in any information retrieval system,
or transmitted in any form or by any means (electronically, mechanically, photocopied,
recorded, or otherwise) without the written consent of Sinterit Sp. z o.o.
There will be no liability for patent infringement in connection with the use of information
contained in this manual. There will be no liability for damage resulting from the use of the
information contained in this manual.
This manual contains content exclusively for the provision of information and the use by
individuals professionally trained and engaged in the operation and maintenance of the
equipment described below.
This manual serves to assist in the correct use of the device, perform basic maintenance
and, if necessary, to solve simple problems, allowing to maintain the device in good condition.
The information contained in this document is intended for the use only with the product
made by Sinterit Sp. z o.o. and called Sinterit Lisa. The company Sinterit Sp. z o.o. is not
responsible for any use of this information in relation to other products.
Due to the constant development of Sinterit Sp. z o.o.'s products the information contained
in this manual, specifications and markings are subject to change without notice.

3) DISCLAIMER

Although every effort has been taken to provide accurate information about the product,
the company Sinterit Sp. z o.o. assumes no responsibility for any incorrect information or
omissions. Sinterit Sp. z o.o. reserves the right to correct any errors and disclaims any liability
in situations resulting from these errors.
Sinterit Sp. z o.o., nor any of the parties involved in the creation, production or delivery
shall not be liable to the purchaser of this product or third parties for damages, losses, costs
or expenses resulting from accident, misuse or use of a product not according to specifications
or unauthorized modifications, repairs or alterations to this product, or failure to observe the
manual Sinterit Sp. z o.o. on operating and maintenance.
The Sinterit Sp. z o.o. company shall not be liable for defects in the printer's firmware
SINTERIT LISA.
The Sinterit Sp. z o.o. company is not responsible for any damage or problems arising from
the use of other supplies than those designated by Sinterit Sp. z o.o. as dedicated.
5