A) Printing: Automated Version (Recommended) - SINTERIT LISA User Manual

wire tension and whether the guide bar for the RECOATER is clean (should be located
in the middle, between the BEDs).
5. The following stages may be carried out in two ways: manually and automatically
(recommended). Both processes have been described below in two subchapters.

5.A) PRINTING: AUTOMATED VERSION (RECOMMENDED)

1. Load the file for printing:
a. Save the file prepared using the SINTERIT STUDIO, to a USB carrier
(Pendrive commended).
b. Connect the carrier to the USB port of the printer, with its power on.
c. In order to load a new file, select: PRINT//LOAD MODEL//LOAD FROM
USB//file name. The loading may take a few minutes (depending on the file
size)
d. In order to load a file which already is in the memory of the printer, select:
PRINT// RECENT MODELS// file name.
WARNING!
Carefully read all of the messages displayed on the screen when
preparing the model for printing. Skipping the described operations may
result in an incorrect printing or damaging the machine.
Image. 2. Example message – reminding to clean the pyrometer and camera windows.
Image. 1. Loading file for printing.
25