SINTERIT LISA User Manual page 27

5. It is also recommended to add a little bit of the PRINT READY POWDER on the
surface of the PRINT BED (number 2 in the picture above). This will make
creating the first layer during positioning, faster.
6. Clean any excess powder from the area around the BEDs, the guide bar and
wire of the recoater, using a paintbrush.
7. Gently blow the infrared heaters (white and green) with air.
8. Use an alcohol wipe to carefully clean the vision windows of the camera and
pyrometers, as well as the glass protecting the laser.
Image. 5. Cleaning particular elements of the printer before printing.
9. In order to precisely cover the PRINT BED with powder and even out the layers, go to
the MECHANICS tab and press START LEVELING. The process lasts until the
recoater processes 25 layers of powder.
10. The operation may be ended quicker: when the powder covers the surface of the
PRINT BED we can press STOP LEVELING.
IMPORTANT!
Remember: The right side of the printed (above the OVERFLOW BIN) is the "0"
position for the RECOATER, that is why it possible for it to move above the BEDs
despite pressing the STOP LEVELING button.
27