(Initial) Printing Using Sinterit Lisa Printer - SINTERIT LISA User Manual

(INITIAL) PRINTING USING SINTERIT LISA
19)
PRINTER:
1. Switch the power button (from "0" to "1") located on the back. Place the key in the
ignition and turn right, clockwise, at a quarter of a turn.
WARNING!
Check whether the safety button is out. If not, release it by turning it
clockwise at a quarter of a turn.
2. In order to open the printer, release the blockade from the magnetic lock on the lid
(press PRINT//UNLOCK LID on the screen).
3. Softly press and then lift the lid. Remember that the lock is unlocked for 10 seconds.
4. Verify whether the SOURCE BED and PRINT BED are ready to work (during the initial
startup, after unpacking, the BEDs should be on par with the printer's case), check the
Image 14. On/Off key position.
Image. 15. Releasing the blockade from the lock.
24