Place A Video Call; Stop Sending Video During A Call; Start Video During An Audio Call - Polycom realpresence trio 8800 User Manual

Polycom RealPresence Trio Solution User Guide
To change the way far-end video displays:
1 Navigate to Settings > Basic > Video > Video Screen Mode.
2 Tap Video Screen Mode (Full Screen).
3 Select Normal, Full, or Crop.
4 Tap Save.

Place a Video Call

Depending on how the system is set up by your administrator, you can place a video call to one contact or
add video during an audio call.
To place a video call:
1 Tap Place a Call, enter a number or select a contact from Contacts or Recent Calls.
2 Tap or tap Dial.
3 In the Call screen, tap Start Video, if needed.

Stop Sending Video during a Call

You can stop transmitting video at any time during a call. Stopping video does not create an audio-only call.
To stop sending video during a call:
» In the Call screen, tap Stop My Video.
The stop video icon
You can't start and stop far-side video. If the system is set up to receive far-side video, the far-side
video always displays.

Start Video During an Audio Call

When you place an audio-only call, you can start sending video at any point during the call if a camera is
connected to the system. After you start sending video, you can mute your video, but you cannot stop
sending video and return to an audio-only call.
To start video during an audio-only call:
» In the Call screen, tap Start My Video.
Polycom, Inc.
is displayed and the far-side cannot see you.
36