Set The Call Rate For Video Calls; Change Video Clarity; Change How Far-End Video Displays - Polycom RealPresence Trio 8800 User Manual

Polycom RealPresence Trio Solution User Guide
You can update the following video settings on the system:
●

Set the Call Rate for Video Calls

●

Change Video Clarity

●

Change How Far-End Video Displays

Set the Call Rate for Video Calls
You can set the maximum bandwidth to use for a video call. The call rate you select applies to your next
video call. Your system administrator can set a maximum call rate for video calls. If your system
administrator sets a call rate limit, you cannot select a call rate above this limit.
To set the maximum call rate to use for video calls:
1 Navigate to Settings > Basic > Call Rate.
2 From the Call Rate screen, select the maximum call rate you want to use for video calls. You can
choose a call rate between 128 kbps and 4096 kbps. The default setting is 2048 kbps.
Change Video Clarity
You can change the Target Frame Rate to improve video clarity. The Target Frame Rate sets how smoothly
your video displays. You can set a rate between 5 (least smooth) and 30 (smoothest). The default rate is 30.
To change the clarity of your video:
1 Navigate to Settings > Basic > Video > Camera Settings.
2 From the Camera Settings screen, tap Target Frame Rate, and tap Up or Down to move the slider
to change the frame rate.
Change How Far-End Video Displays
You can adjust the appearance of far-end video so that it displays as one of the following:
● Normal The video image displays with correct proportions. Black bars appear on the top, bottom,
or sides of the area to maintain the correct aspect ratio if the aspect ratio of the sent video does not
match the display area on the system. The portions of the video that are not being received display
as black bars.
● Full If the received video image is not the same aspect ratio as the monitor's display area, the video
image is stretched to fill the area. If the aspect ratios match, no stretching occurs.
● Crop The video image is resized to maintain the correct aspect ratio. Any parts of the image that do
not fit within the area are cropped.
To change the way far-end video displays:
1 Navigate to Settings > Basic > Video > Video Screen Mode.
2 From the Video Screen Mode screen, select and adjust the following settings:
3 Tap Video Screen Mode (Full Screen) to adjust the video image that displays on the full screen to
Normal, Full, or Crop. The default setting is Normal.
4 Tap Save.
Polycom, Inc. 47