Locking The Realpresence Trio 8800; Lock The System - Polycom RealPresence Trio 8800 User Manual

Polycom RealPresence Trio Solution User Guide
To sign out of Lync 2013:
» Tap Sign Out or navigate to Settings > Features > Microsoft Lync > Sign Out.
After you sign out of Lync, you cannot call or view your Lync contacts. However, you can still use other
features.

Locking the RealPresence Trio 8800

Your system administrator provides you with a user password that you can use to unlock the system and
use to answer calls when the system is locked.
When the system is locked, you can:
● Make outgoing calls to authorized numbers only.
● Enter a password to answer incoming calls.
● Unlock the system, make an authorized call, or view the browser, if enabled.
● View messages on the status bar informing you that the system is locked and that only authorized
calls are allowed. Any messages that displayed before the system was locked do not display.
The following figure shows the Home screen when the system is locked.
Locked Home screen

Lock the System

When you lock the system, you can choose to enable one of the following options:.
● Allow ringing when locked - incoming calls ring on the system, and you can answer calls by entering
a user password.
● DND when locked - Do Not Disturb applies to all lines and the system does not ring for incoming calls
(see the section
Polycom, Inc.
Enable Do Not Disturb).
20