Viewing Mac Addresses; Viewing The Wag Configuration - Siemens A53457 Installation & Maintenance

To View the Routing Table:
Type routes and press Enter. The route table information appears, similar to the following:
FF.SNT.NOD Timer Interface
41.001.003 0120 Echelon
00.000.000 0120 010.232.053.041
00.000.000 0120 010.232.053.041
00.000.000 0099 010.232.053.041
3.4

VIEWING MAC ADDRESSES

This command shows the user any MAC addresses of devices in the routing table.
To View the MAC Address Information:
Type smac and press Enter. The MAC information appears, similar to the following:
smac
IP Address Hardware MAC address
010.232.053.041 00-20-4a-81-e7-40
010.232.053.041 00-20-4a-81-e7-40
010.232.053.041 00-20-4a-81-e7-40
3.5

VIEWING THE WAG CONFIGURATION

This command shows the current configuration settings for the WAG.
To View the Configuration:
Type sconfig and press Enter. The configuration information appears, similar to the following:
Wayside Access Gateway (WAG) up and running.
WAG ATCS Address: 7.620.100.100.01.01
Configured IP address: 10.232.53.40
IP network mask:
Listening on UDP ports 5000, 5001, 5002, 5003
Listening on TCP ports 23, 6000, 6001, 6002
Local Echelon: 01.01
Serial interface: Command, 9600, None, 8, 1/NoFlow
Route table expiry: 5400 seconds
Broadcast medium: IP Ethernet
DHCP Server: Disabled
Type 7 route length: 12 digits 7RRRLLLGGGSS
Document No.: COM-00-05-16
Version: C.1
Port Address
7.620.020.010.03.02 073269
-UDP- 7.620.020.020.03.02 073249
-UDP- 7.620.020.020.03.03 040259
-UDP- 7.620.123.123.12.10 002152
ATCS Address
7.620.020.020.03.02
7.620.020.020.03.03
7.620.123.123.12.10
32 bits [255.255.255.255]
3-5
OPERATION
Sent Received
073249
146500
000000
000000
June 2006, Revised June 2014