Table 3-2. Log Entry Descriptions - Siemens A53457 Installation & Maintenance

Classification Log Entry
Fatal
CRASH! Point of
failure: <code>
Fatal
CRASH: <0xXXXX> st
<YYYY> ad <ZZZZZZZZ>
ins <WWW>
Fatal
ERROR: Memory address
<x> invalid!
Fatal
ERROR: Ser no RX buf!
Fatal
ERROR: Ser out
exceeded! <x>
Fatal
ERROR: Ser out no TX
buf!
Fatal
Fail relmem at <x>
Document No.: COM-00-05-16
Version: C.1

Table 3-2. Log Entry Descriptions

Description
A code number for Siemens Rail Automation
personnel to determine where a software
crash occurred.
A fatal software or hardware error occurred.
Information about the crash is saved in the
log. The information includes the numeric
contents of the CPU registers and information
about what code was running when the crash
occurred. Used by Siemens Rail Automation
personnel for troubleshooting.
Indicates that a programming error occurred.
Used by Siemens Rail Automation personnel
for troubleshooting.
A flood of inbound serial data occurred that
the WAG could not handle properly. Used by
Siemens Rail Automation personnel for
troubleshooting.
Used by Siemens Rail Automation personnel
to determine how an extremely large block of
serial data was requested to be sent out the
serial interface.
Used by Siemens Rail Automation personnel
for troubleshooting.
Indicates that a programming error occurred.
Used by Siemens Rail Automation personnel
for troubleshooting.
3-19
OPERATION
June 2006, Revised June 2014