Figure 2-45. Change Routing Region Domain One - Initial Screen - Siemens A53457 Installation & Maintenance

INSTALLATION AND CONFIGURATION
If a DNS (Directory Name Services) server is configured into the WAG, symbolic names for the
Domain may be provided and the WAG will look up the IP address for the symbolic name.
This function defaults to Disabled.
To Change Routing Region Domain 1:
1. On the Second Configuration Menu, select "Routing Region Domain 1" to be changed. The
Change Routing Region Domain One screen appears (figure 2-45).

Figure 2-45. Change Routing Region Domain One - Initial Screen

2. From this initial screen, do one of the following:
a. To enter or change an IP Address, select "Enter an IP address" and then press ENTER. Go
to step 3.
b. To enter or change a symbolic name, select "Enter a symbolic name" and then press
ENTER. Go to step 4.
c. To disable Routing Region Domain 1, select "Disable Routing Region Domain One" and
then press ENTER. The user is returned to the Second Configuration screen.
d. To exit this function without making changes, select "Exit without a change" and then
press ENTER. The user is returned to the Second Configuration screen.
3. From the screen in figure 2-45 If "Enter an IP Address" was selected, then do one of the
following (see Figure 2-46):
a. To disable Routing Region Domain 1, enter 0 (zero) in the first data field and then press
ENTER. The user will be returned to the Second Configuration Menu.
b. To leave the first data field of the current IP Address unchanged, press ENTER.
c. To change the first data field of the IP Address, type the digit(s) and then press ENTER.
Entry can be any value from 1 to 255.
d. Repeat step b or c above for each of the four data fields. After the fourth data field is
filled, the user will be returned to the Second Configuration Menu.
Document No.: COM-00-05-16
Version: C.1
2-34
June 2006, Revised June 2014