Table of Contents
Advertisement
1.3.2
LED Indicators
The front of the WAG has 5 LEDs.
•
Green Health LED flashes to indicate good health.
Red TP LAN LED flashes when Echelon transmits or receives a message frame.
•
Green Power OK LED indicates the WAG is powered.
•
XPort LAN Ethernet J2 connector has 2 LEDs that indicate the following:
•
Link LED (Top of J2)
Color
Off
Amber
Green
1.4
PRODUCT SPECIFICATIONS
This section details the specifications for the Wayside Access Gateway. For examples of wiring
other equipment to the WAG, see Section 2.
1.4.1
Physical Specifications
Standard 19" rack mount using relay rails.
1.4.2
Dimensions
H x W x D:
H. 9.75" (include mounting tab), W. 2.25", D. 7.5"
24.77 cm x 5.72 cm x 19.05sm)
Weight:
3 lbs. 7 oz (1.67 kilograms)
1.4.3
Power Specifications
Voltage:
Between 8.5V and 24V DC, 12V Nominal
Isolation:
2000VRMS, 60Hz, 60Sec
1.4.4
Environmental Specifications
Temperature:
-40 °F to +158 °F (-40 °C to +70 °C)
Humidity:
0 – 95% non-condensing
Document No.: COM-00-05-16
Version: C.1
Meaning
No Link
10 Mbps
100 Mbps
1-7
Activity LED (Bottom of J2)
Color
Off
Amber
Green
June 2006, Revised June 2014
DESCRIPTION
Meaning
No activity
Half-Duplex
Full-Duplex
Advertisement
Table of Contents
Troubleshooting
