Siemens A53457 Installation & Maintenance page 113

Table 3-2 continued
Classification Log Entry
Informational
Route Add Unknown
<ATCS addr>
Informational
Route Add XPORT <IP
addr> <ATCS addr>
Informational
Route Drop <ATCS add>
Informational
Route Drop UNID
<neuron ID>
Informational
Service button pressed
Informational
TCP <IP addr> < port#>
Informational
Wayside Access Gateway
Started
Informational
XMODEMBOOT command
received
Informational
XPORT IP Address: <IP
addr>
Document No.: COM-00-05-16
Version: C.1
Description
Means the creation of an internal routeable
device that is internal to the WAG itself.
Symbolic, internal ATCS devices can be
created by the WAG for such things as testing
or loop-back tests.
Means a new ATCS address for a device
detected on the Ethernet LAN was added to
the WAG routing table. The IP address and the
ATCS address of the device is logged. Typically
the device is a type 2 Office device across a
TCP connection. However the WAG allows any
ATCS-capable device on the Ethernet LAN to
send it ATCS messages to route.
Means an ATCS address of a routable device
that has been removed from the WAG route
table. The entry expired. If the device was on a
TCP connection, the TCP connection has been
disconnected.
Means an Echelon device that is addressed
with a Unique Neuron Identifier address has
been removed from the WAG routing table
because it expired.
Means that the Echelon service button was
pressed.
Connected / Disconnected Means the IP
address and the Ethernet port number of TCP
connections that are made and dropped.
Means that the WAG restarted either from a
cold power up or from a warm start.
Someone entered the XMODEMBOOT
command from either the serial interface or
from a Telnet session.
Means the IP address of the WAG as reported
by the XPort component.
3-25
OPERATION
June 2006, Revised June 2014