Figure 2-7. Wag Terminal Ready Screen; Figure 2-8. Hyperterminal Configuration Screen - Siemens A53457 Installation & Maintenance

INSTALLATION AND CONFIGURATION
4. With the computer connected to the WAG and the terminal emulation software running, type
con and press ENTER to modify the WAG configuration settings. The following screen
appears.

Figure 2-8. HyperTerminal Configuration Screen

To configure the WAG, go to the Configuration of the WAG Section (see Section 2-6).
Document No.: COM-00-05-16
Version: C.1

Figure 2-7. WAG Terminal Ready Screen

2-8
June 2006, Revised June 2014