Typical Pst Configuration Parameter Settings; Figure 2-59. Change Persistent Serial Telnet Ip Address Screen; Figure 2-60. Change Persistent Serial Telnet Ip Address Symbolic Name Screen - Siemens A53457 Installation & Maintenance

a. To disable the Persistent Serial Telnet IP Address enter 0 (zero) in the first data field and
then press ENTER. The user will be returned to the Second Configuration Menu.
b. To leave the first data field of the current IP Address unchanged, press ENTER.
c. To change the first data field of the IP Address, type the digit(s) and then press ENTER.
Entry can be any value from 1 to 255.
d. Repeat step b or c above for each of the four data fields. After the fourth data field is
filled, the user will be returned to the Second Configuration Menu. Go to step 5.

Figure 2-59. Change Persistent Serial Telnet IP Address Screen

4.
On the screen in figure 2-60, enter the symbolic name for the Persistent Serial Telnet IP
Address. Entries can consist of up to 40 characters including A-Z, 1-9 and 0, periods (.) and
dashes (-). After entering the symbolic name press ENTER.
The user will be returned to the Second Configuration Menu. Go to step 5.

Figure 2-60. Change Persistent Serial Telnet IP Address Symbolic Name Screen

5. Prior to exiting the Second Configuration Menu, select "Save changes then restart" to save
changes and restart the WAG.
2.6.28.1

Typical PST Configuration Parameter Settings

The following table shows typical configuration settings for a WAG using the Persistent Serial
Tunnel function.
Document No.: COM-00-05-16
Version: C.1
INSTALLATION AND CONFIGURATION
2-43
June 2006, Revised June 2014