Figure 81: Dialog „Add Slave - First Page (Name); Figure 82: Dialog Add Slave - Second Page"(Parameter) - hilscher NIOT-E-TIB100-GB-RE User Manual

Use Cases
Edge Gateway NIOT-E-TIB100-GB-RE | Passive Operating Mode
DOC180202UM01EN | Revision 1 | English | 2018-04 | Released | Public
Ê The first page of the dialog Add slave is opened.
Figure 81: Dialog „Add slave - first page (Name)"
Ø Under Name specify the name which shall identify the EtherCAT Slave
device in future.
Ø Click at Next.
Ê The second page of the dialog Add slave is opened.
Figure 82: Dialog Add slave - second page"(Parameter)
Within the dialog Add slave, the following specifications concerning the
configuration are made:
76/145
© Hilscher 2018