Figure 102: Specifying The Second Filter Criterion - Entering The Filter Condition; Figure 103: Specifying The Second Filter Criterion - Selection Of User-Defined Uint8 - hilscher NIOT-E-TIB100-GB-RE User Manual

Use Cases
Edge Gateway NIOT-E-TIB100-GB-RE | Passive Operating Mode
DOC180202UM01EN | Revision 1 | English | 2018-04 | Released | Public
Now the second filter criterion must be specified.
Ø In order to specify the second filter criterion Byte at Offset 14 of the
Ethernet Frames equals 4, again click at the Symbol
Ê A second box for specifying a filter criterion appears.
Figure 102: Specifying the second filter criterion - Entering the filter condition
Ø Below type select User-definedt uint8.
Figure 103: Specifying the second filter criterion - Selection of User-defined uint8
100/145
.
© Hilscher 2018