Figure 2: Setup With Hardware-Tap - hilscher NIOT-E-TIB100-GB-RE User Manual

Passive process data acquisition with the Edge Gateway
Edge Gateway NIOT-E-TIB100-GB-RE | Passive Operating Mode
DOC180202UM01EN | Revision 1 | English | 2018-04 | Released | Public
For the solution with Hardware-TAP, an additional device such as the
Ethernet mirror TAP netMIRROR NMR-TFE-RE from Hilscher (Part number
7340.100) is required. The following figure explains how to connect the
Hardware-TAP with the Edge Gateway:
Figure 2: Setup with Hardware-TAP
Note:
More information concerning the Ethernet Mirror TAP netMIRROR
NMR-TFE-RE can be found at the Hilscher-Website at
www.hilscher.com/de/produkte/produktgruppen/analyse-und-
datenerfassung/fuer-dauerhafte-installation/nmr-tfe-re/?.
Information on how to apply the netMIRROR with the Edge
Gateway is available at Hardware-based TAP
(netMIRROR) [} page 11].
Also see about this
2 Software-based TAP [} 9]
2 Hardware-based TAP (netMIRROR) [} 11]
7/145
https://
© Hilscher 2018