Step 3 - Adjust Basic Settings Of The Passive Fieldbus Configurator; Figure 22: Side Menu; Figure 23: Main Menu - Register Card "Views - hilscher NIOT-E-TIB100-GB-RE User Manual

Use Cases
4.1.3

Step 3 - Adjust basic settings of the Passive Fieldbus Configurator.

Edge Gateway NIOT-E-TIB100-GB-RE | Passive Operating Mode
DOC180202UM01EN | Revision 1 | English | 2018-04 | Released | Public
The Passive Fieldbus Configurator requires the following basic settings:
Setting of IP address
·
Setting ofSetting of network speed
·
To do so, proceed as follows:
Ø Open the main menu. in order to do so, click at button Menu within the
side menu located at the right side.
Figure 22: Side menu
Ê The main menu is opened.
Figure 23: main menu - Register card "Views"
31/145
© Hilscher 2018