Example: Access To The Edge Gateway Over Opc Ua Using The Client Ua Expert; Figure 134: Intro Screen Of Opc Ua Client Ua Expert - hilscher NIOT-E-TIB100-GB-RE User Manual

Further processing of the process data
5.2.2 Example: Access to the Edge Gateway over OPC UA using the
Client UA Expert
Edge Gateway NIOT-E-TIB100-GB-RE | Passive Operating Mode
DOC180202UM01EN | Revision 1 | English | 2018-04 | Released | Public
Prerequisites
This example uses the OPC UA-Client UA Expert from Unified Automation
(http://www.unified-automation.com). Fulfill the following conditions in
order to access the current data of the Edge Gateway via the UA Expert:
1. UA Expert must have been installed.
2. The Edge Gateway is currently in the passive mode of operation and
the mode Operational is active.
Approach
Proceed as follows:
Ø Start the UA Expert.
Figure 134: Intro screen of OPC UA Client UA Expert
124/145
© Hilscher 2018