Figure 16: Safety Query When Storing The Opc Ua Server Configuration; Table 5: Input Fields For Settings Concerning Connection Establishment Of The Opc Ua Server For Edge - hilscher NIOT-E-TIB100-GB-RE User Manual

Passive process data acquisition with the Edge Gateway
Edge Gateway NIOT-E-TIB100-GB-RE | Passive Operating Mode
DOC180202UM01EN | Revision 1 | English | 2018-04 | Released | Public
Connection settings
Here you can specify via which username and which password all
connections of the OPC UA Server will be established.
Fieldname Meaning
Username Username for all connections of the OPC UA
Server
Password Password for all connections of the OPC UA
Server
Table 5: Input fields for settings concerning connection establishment of the OPC UA Server
for Edge
Storing the settings for the OPC UA Server for Edge
After you finished making yor settings for the OPC UA Server for Edge, you
have to store these as follows in order to make them effective.
Ø Click at Save all.
Ê The following message box appears:
Figure 16: Safety query when storing the OPC UA Server configuration
Ø Click at OK.
ð The following message appears:
OPC UA config settings are successfully saved
The changes are stored in the Edge Gateway now. However, they will
get effective after the next restart of the Edge Gateway.
23/145
Comment
Text field
Text field
© Hilscher 2018