Running In The Engine - KTM 1290 SUPER ADVENTURE R 2017 Owner's Manual

9 PREPARING FOR USE
Warning
Danger of accidents The brake system fails in the event of overheating.
If the foot brake lever is not released, the brake linings drag continuously.
–
Take your foot off the foot brake lever when you are not braking.
Info
When using your vehicle, remember that others may feel disturbed by excessive noise.
–
Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the Service and Warranty Booklet at vehicle handover.
–
Before your first trip, read the entire Owner's Manual carefully.
–
Get to know the controls.
–
Adjust the motorcycle to your requirements, as described in the "Ergonomics" chapter.
–
Get used to handling the motorcycle on a suitable piece of land before making a longer trip. Try also to ride as slowly as possible and
in a standing position to get a better feeling for the motorcycle.
–
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
–
Run the engine in.
9.2

Running in the engine

–
During the running-in phase, do not exceed the specified engine speed.
Guideline
Maximum engine speed
During the first: 1,000 km (620 mi)
After the first: 1,000 km (620 mi)
6,500 rpm
10,250 rpm
106