Table of Contents
Advertisement
7 PREPARING FOR USE
–
Read the entire Owner's Manual before riding for the first time.
–
Get to know the controls.
–
Adjust the basic position of the clutch lever. (
–
Adjust the basic position of the hand brake lever. (
–
Adjust the basic position of the foot brake lever.
–
Set the basic position of the shift lever.
–
Get used to handling the motorcycle in a suitable area before undertaking a more demanding ride.
–
Also, ride as slowly as possible and in a standing position to get a better feeling for the motorcycle.
–
Do not undertake any off-road trips that exceed your ability and experience.
–
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
(All SX‑F models)
–
(XC‑F US)
–
–
Do not exceed maximum permissible weight and maximum permissible axle loads.
Guideline
Maximum permissible overall weight
Maximum permissible front axle load
Maximum permissible rear axle load
–
Run in the engine. (
7.2
–
During the running-in phase, do not exceed the specified engine speed and engine performance.
Guideline
Maximum engine speed
Maximum engine performance
–
Avoid fully opening the throttle!
24
Info
The delivery certificate and the Service and Manufacturer Warranty Booklet are regarded as evidence
of warranty services.
Info
This vehicle is not approved for use on public roads.
When off road, it is recommended that you are accompanied by another person on another vehicle so
that you can help each other.
Do not carry luggage.
If luggage is carried, ensure it is fixed firmly as close as possible to the center of the vehicle and ensure
even weight distribution between the front and rear wheels.
Info
Motorcycles react sensitively to any changes of weight distribution.
p. 24)
Running in the engine
During the first operating hour
During the first 3 operating hours
p. 80)
p. 83)
(
p. 89)
(
p. 113)
335 kg (739 lb.)
145 kg (320 lb.)
190 kg (419 lb.)
7,000 rpm
≤ 75 %
Advertisement
Table of Contents
