KTM 1290 SUPER ADVENTURE R 2017 Owner's Manual page 53

Hide thumbs Also See for 1290 SUPER ADVENTURE R 2017:
Table of Contents

Advertisement

7
COMBINATION INSTRUMENT
The indicator lamps offer additional information about the operating state of the motorcycle.
When the ignition is switched on, all indicator lamps light up briefly.
Possible states
Race-on indicator lamp lights up/flashes yellow/orange/red – Status or error messages relating to Race-on
system/alarm system.
The left turn signal indicator lamp flashes green with a steady rhythmic flash – The left turn signal is switched on.
The high beam indicator lamp lights up blue – The high beam is switched on.
The general warning lamp lights up yellow – An operating safety (warning) message was detected. This is also
shown on the display.
ABS indicator lamp lights up yellow – Status or error messages relating to ABS. The ABS indicator lamp flashes if
the ABS mode Offroad is enabled.
TC indicator lamp lights up/flashes yellow – The motorcycle traction control is not enabled or is currently interven-
ing. The TC Indicator lamp also lights up if an error is detected. In addition, the TC indicator lamp flashes if the
HHC (
The idle indicator lamp lights up green – The transmission is in idle.
The oil pressure warning lamp lights up red – The oil pressure is too low.
The cruise control system lamp lights up yellow – The cruise control system function is switched on, but the speed
control is not active.
The cruise control system lamp lights up green – The cruise control system function is switched on and the speed
control is active.
Malfunction indicator lamp lights up yellow – The OBD has detected an emission- or safety-critical fault.
p. 113) (optional) is active.
51

Advertisement

Table of Contents
loading

Table of Contents