15
WHEELS, TIRES
–
Push the wheel spindle in all the way and mount chain adjuster
Info
Mount chain adjusters
–
Make sure that the chain adjusters are fitted correctly on the adjusting screws.
Guideline
In order for the rear wheel to be correctly aligned, the markings on the left and right
chain adjusters must be in the same position relative to reference markings
M00631-10
–
Tighten nut
Guideline
Nut, rear wheel spindle
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Remaining chassis screws
–
Operate the foot brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.
S00289-10
3
4
and
5
.
M25x1.5
6
in the drill hole.
7
.
4
and nut
in the same position.
90 Nm
Thread greased
(66.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
191
5
.
B
.