Table of Contents
Advertisement
14
BRAKE SYSTEM
14.1
Antilock brake system (ABS)
The ABS unit
return pump, is installed under the seat. One wheel speed sensor
case on the front and the rear wheel.
Warning
Danger of accidents Changes to the vehicle impair the function of the ABS.
–
Only allow the rear wheel to spin with the front brake applied away from public
road traffic if the ABS is switched off.
–
Do not make any changes to the suspension travel.
–
Only use spare parts on the brake system which have been approved and recom-
mended by KTM.
–
Only use tires/wheels approved by KTM with the corresponding speed index.
–
Maintain the specified tire air pressure.
–
Service work and repairs must be performed professionally. (Your authorized
KTM workshop will be glad to help.)
ABS is a safety system that prevents locking of the wheels when driving straight ahead
without the influence of lateral forces.
Warning
Danger of accidents Driving aids can only prevent a rollover within the physical limi-
tations.
It is not always possible to compensate for extreme riding situations, for exam-
ple with luggage loaded with a high center of gravity, varying road surfaces, steep
descents or full braking without disengaging the gear.
–
Adapt your riding style to the road conditions and your driving ability.
H02020-01
ABS has two operating modes: the Road and OffroadABS modes.
1
, which consists of a hydraulic unit, brake electronics control unit, and
171
2
is located in each
Advertisement
Table of Contents
